bending force的例句大全

According to the law of crack development and mechanical index correlation analysis results, use the maximum bending force, shearing force and fracture energy as the main mechanical parameters, put forward the test design method.

基于裂缝动态发展规律与力学指标关联度分析结果，以最大弯曲力、层间剪切力和断裂能作为主要设计参数指标，提出配合比设计的试验方法。

Teaching of Internal Bending Force in Material Mechanics

材料力学中弯曲内力的教学研究

FEM Analysis of Effect of Bending Force on the Crown of Strip

弯辊力对带钢凸度影响的有限元分析

Synthesizing Method Used in Drawing Diagrams of Internal Bending Force

综合法绘制梁的内力图

Behaviors: light oil curing stressing 90 bending force, there of integrity or drop layer.

现象: 光油固化层受90折弯力, 出现裂口或掉层.

Interactive Bending Force of Bridge and Track of High Pier Bridge

高墩桥的桥梁和轨道相互作用的挠曲力

Analysis and modification of hydraulic roller bending force control system

热轧机组液压弯辊力控制系统特性分析与改进

This design method can improve dynamic and static characteristics of system by collecting bending force signal, summarizing experience and designing control rule.

通过采集弯曲力的变化信号，总结弯曲经验，制定控制规则，改善了系统的动静态特性。

It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.

首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。

A motion law of the disintegrative units is obtained by analyzing the internal force and bending moment of the architectural units.

通过分析建筑物构件的内力和弯矩，得到了建筑物解体时构件的运动规律。

Shear force is implicit in the development of bending moments.

杆中的剪力在弯矩的推导中是不明显的.

Inland Vessel External Force Calculation with the Correction of Bending Deflection

内河船舶考虑弯曲挠度影响的外力计算

In hot strip mills, crown and flatness are main targets of profile and flatness control, and bending force of work rolls is one of main control ways in shape control.

凸度和平坦度是热连轧机板形控制的主要目标，多机架工作辊弯辊力则是其板形控制的主要调节手段。

When occlusion by molar and premolar of fracture part, the stress of upper fracture part was bending force and the lower was compressing force.

患侧磨牙、前磨牙咬合骨断层应力分布下部为张力带、上部为压力带。

The forced diogram of sulfur recovery condenser with asymmetric arrangement triple-saddle support is analyzed and simplified in this paper, and the mathematical formula for computing the counter force and axial bending moment of each support is presented for design reference.

通过对非对称布置三鞍座硫回收冷凝器的受力分析及简化，提出了计算各支座反力和轴向弯矩的数学公式，供设计时参考。

By integrating the function, the shear force, bending moment and the angle of rotation of the whole beam are expressed by one equation respectively.

通过积分，全梁的剪力、弯矩、转角和挠度可分别用一个方程表示。

During the pipeline running , thanks to the axial force line may become sinusoidal or spiral bending.

由于轴向力的存在,管柱还可能发生正弦或螺旋屈曲等.

Therefore, the bending moment may cause normal stress at the axis of gravity, and the concept of equivalent axial force is induced.

因此弯矩在形心处要引起正应力，从而引出所谓等效轴力的概念。

A warping, bending, or cracking, as that by excessive force.

翘曲, 弯曲,裂开:翘曲 、 弯曲或裂开, 如过强的外力引起.

Axial force has a great effect on deformation of rod or tubing with initial bending stress.

轴向力对具有初弯曲的杆(管)柱变形影响很大.